Asphalt No. 30 | Asphalt drilling fluid treatment agent | Oxidized asphaltQingzhou Tianyi Chemical Co., Ltd

1. Failure in the supply of cold materials

Refuse to supply cold materials. This disadvantage may be caused by gravel or foreign objects blocking under the cold data belt. If the cable asphalt manufacturer has circuit defects, it is necessary to check whether there is a cable short circuit in the circuit. The disadvantages of belts are usually caused by several factors: belt sliding and changes in belt tension. At this moment, the operators need to make another adjustment to ensure that the strip organization is in a stable and safe working condition. The value of the indoor ammeter needs to be monitored, and the magnitude of the value is the key basis for recognizing the shortcomings of certain electrical equipment. For example, an increase in load torque is usually caused by mechanical defects of the equipment, when the current of the motor is much higher than normal operation. Therefore, we have begun to acknowledge the potential risks of equipment defects and the need for repairs or shutdown inspections.

2. Disadvantages of the mixer.

The primary drawback of the mixer is noise, which is directly related to bearing damage and dislocations. The bearing problem is caused by the instantaneous overload of the hybrid engine. At this moment, we can persist in using bearings to eliminate any shortcomings. If the parts are severely worn or internally detached, it is also necessary to replace them, such as maintenance panels, mixing arms, and mixing blades. When the mixer exits, the temperature of the aggregate may sometimes undergo unusual changes. We need to carefully clean the temperature sensor and check whether the cooling equipment is working properly.

3 Disadvantages of burner combustion

If the burner has combustion defects, the following operations should be carried out: (1) The cable asphalt manufacturer should inspect the interior of the operating room to see if there are conditions for combustion. (2) Check the condition of the power switch. In addition, it also includes whether the ventilation door is activated, whether the ventilation door of the blower is in the combustion position, and whether the dryer and internal pressure gauge are in the manual position. If the combustion is ineffective, check if the fuel passage is blocked. Finally, check the working condition of the pump and the output pressure of the pump.

4 Sensor Disadvantages

Commercial concrete station sensors include temperature sensors, data orientation sensors, and weight sensors. If the sensor measurement is inaccurate or defective, it may disrupt the operation of commercial concrete stations. Therefore, it is necessary for the operators to regularly carry out repairs. Accuracy measurement should also be conducted annually.

Disadvantages of PLC module

PLC programmable controller plays an important role in the mixer, with the following advantages: uniform disadvantage, short time, high reliability, easy programming, and easy to grasp. If the PLC module fails, please check the indicator first. Then, in order to find a specific location, it is necessary to refer to the defect description at this moment. In this situation, it is possible to replace the module in order to quickly restore the system. It is also necessary to check if the input switch has a signal. Is the connector shaking? The output logic output does not match. If you have any other questions, please refer to the official website of the cable asphalt manufacturer or contact us directly.