1.1, cold base oil

At the bottom of the waterproof layer, cold oxidized asphalt penetration layer oil is generally used, and the operation method of spraying or painting is used. Basically, the job must be done after the main surface is completely monotonous, and the coating must be thin and uniform, without blanks. If the flat surface is too rough, first apply a layer of fast-evaporating cold base oil, and then use the cold base oil to smooth the second floor. The distance between the two layers of cold base oil is generally about 4.6 hours, and the surface of the first layer of cold base oil is quietly pressed with fingers without leaving any traces.

Emulsified Asphalt Waterproof Coating

It has certain waterproof and corrosion-resistant properties. Because of the characteristics of asphalt itself, the emulsified asphalt waterproof coating has a short service life, strong cracking, low temperature flexibility and good heat resistance. This refers to the industrial production of 3-4 grade waterproof coatings, civil engineering waterproof layers, bathrooms, waterproof layers, and underground moisture-proof and anti-corrosion coatings. This is an inexpensive waterproof coating. Therefore, the production and application of emulsified asphalt waterproof coatings are gradually reduced.

Lime emulsified asphalt coating

It is a cold asphalt suspension emulsion based on asphalt, with lime solution as slack agent and asbestos fiber as filler. After the lime emulsified asphalt is covered on the ground, the internal structure of the suspension is redistributed due to the transpiration effect of water. The slack fine asphalt particles, lime and asbestos are liquefied and packed together, and the asphalt condensation film and the lime in the asphalt form a oxidized asphalt uniform structure. Honeycomb skeleton, which is waterproof layer with high heat resistance. It has the advantages of good weather resistance, good heat resistance, construction on wet surfaces, good adhesion to the bottom layer, non-toxic, non-polluting, convenient construction, etc. It is widely used in underground, bathroom, kitchen, roof, road, bridge and other waterproof projects.

Waterproof bitumen based, water-based paint

Water bitumen waterproof coating is a polymer modified bitumen waterproof coating made of various modified bitumen. According to the difference of emulsifier, final product variety and construction process, it can be divided into water-asphalt-based waterproof coating and water-asphalt-based thin waterproof coating.

Waterproof asphalt coating (AE-1 type) is divided into waterproof asphalt coating (AE-1-A), bentonite emulsifier (AE-1-B) and lime asphalt coating (AE-1-C) according to the mineral emulsifier used.

Water-asphalt-based waterproof asphalt coating (AE-2) is divided into asphalt emulsifier chloride (AE-2-A), asphalt water rubber (AE-2-B) and chemical emulsifier (AE-2) according to different chemical emulsifiers -C).If you have any other questions, please contact us for oxidized asphalt details or contact us directly.

Company website：www.tyasphalt.com